Product characteristics:
◆ The sampling table is widely used in pathology laboratory. It provides a clean and safe sampling environment for the laboratory staff.
It meets the relevant requirements of "China safety and environmental protection regulations", and is the first choice of safety
equipment for pathologists. It is also one of the very important safety equipment in the laboratory.
◆ The panel of the main frame of the material taking platform is made of 1.2mm stainless steel SUS304 mold and then welded after
being folded, the side plate is made of 1.2mm stainless steel SUS304 mold, and the surface is polished and brushed.
◆ High power air suction device, simple installation of exhaust system, low noise, fast and thorough removal of harmful gases。
◆ The long waist slot hole of the exhaust hood is formed, which is beautiful and beautiful. There is a wide storage platform above the
exhaust hood, which can store the materials needed.
◆ There is a certain slope (≤ 5 °) on the whole sampling table, which is convenient for water flow during flushing, and no external force is
needed to make the sewage discharge smoothly and timely.
◆ The operation table is made of 1.2mm stainless steel wire drawing plate, with wide surface area, water retaining edge around to
prevent water overflow, corrosion-resistant, durable and easy to clean. The table is equipped with a special flushing pool with an
integrated stainless steel sink with a depth of 280mm.
◆ Equipped with cold and warm faucets to adapt to the climate of different regions, to ensure a comfortable working environment and
equipped with metal hose expansion faucets to provide hot and cold water.
◆ The left side of the equipment is equipped with flushing device, and the water volume is adjustable.
◆ Special leakage protection air switch, flame-retardant power base, to ensure the safety of users.
◆ Equipped with ultraviolet air disinfection system, lighting system, auxiliary light source for sampling.
◆ It can be equipped with a pipeline crushing system. The imported pipeline crusher is used. The debris after the material is taken
flows into the water pool with the water, and is discharged into the sewer after being crushed, which not only avoids the tedious
cleaning work, but also does not cause the sewer to be blocked.
◆ Optional 5-power magnifier.
◆ ptional hook
Model and technical parameters:
Index / model | QCT-1800 |
Exhaust system | Lower exhaust design, high-power suction device, can quickly and thoroughly remove harmful gases. |
Storage platform (length and width) | 1360*350mm |
power | ≤1500W |
Exhaust volume | 3500~4800m3/h |
Full pressure range | 330~550pns |
Exhaust wind speed | ≥0.8m/s |
Noise | ≤62dB |
Vibration half peak | ≤3μm(X.Y.Zdirection) |
Power configuration | AC,Single-phase200V 50Hz |
Spare socket | 2組 |
Illuminance | ≥500LX |
inside diameterLDH | 1660*600*700mm |
Outside diameter dimensionLDH | 1800*750*1900mm |
Specification and quantity of fluorescent lamp / UV lamp | 40W①/40W① |
weight | 160kg |